R&S ESR Series

Remote Control
R&S
®
ESR
967User Manual 1175.7068.02 ─ 12
Manual operation: See "Selecting the Test Report Contents" on page 546
Table 11-27: Available <items> in receiver application
<Item> Description Default
DIAGram Screenshot of the scan results. x
FRESults Numerical results for the final measurement. x
HEADer Header made up of several lines of information that is (by
default) displayed on each page of the test report.
x
IF Screenshot of the results for IF analysis.
IFSPectrogram Screenshot of the IF spectrogram.
MARKers Contents of the marker table.
PAGecount Page numbers. x
PRESults Contents of the peak list.
SCANtable Measurement configuration as defined in the scan table. x
SETTings Settings that have been used during a measurement. x
SPECtrogram Screenshot of the spectrogram.
SRESults Numerical results for the scan.
TDSTamp Date and time of the measurement. x
TRANsducer Characteristics of the transducer.
Table 11-28: Available <items> in spectrum application
<Item> Description Default
DIAGram Screenshot of the scan results. x
HEADer Header made up of several lines of information that is (by
default) displayed on each page of the test report.
x
PAGecount Page numbers. x
RESultlist Numerical measurement results.
SETTings Settings that have been used during a measurement. x
SPECtrogram Screenshot of the spectrogram.
TDSTamp Date and time of the measurement. x
TRANsducer Characteristics of the transducer.
Table 11-29: Available <items> in I/Q analyzer
<Item> Description Default
DIAGram Screenshot of the result diagram. x
HEADer Header made up of several lines of information that is (by
default) displayed on each page of the test report.
x
PAGecount Page numbers. x
Working with Test Reports