R&S ESR Series

Remote Control
R&S
®
ESR
887User Manual 1175.7068.02 ─ 12
<m> irrelevant
Parameters:
<Span> Numeric value that defines the span in Hz.
The maximum span depends on the marker position and
R&S FSV model.
*RST: 5% of current span
Example:
CALC:DELT:BPOW:SPAN 20
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer[:STATe] <State>
This command turns delta markers for band power measurements on and off.
If neccessary, the command also turns on a reference marker.
For details see "Performing Band Power Measurements" on page 428.
Suffix:
<n>
.
irrelevant
<m> irrelevant
Parameters:
<State> ON | OFF
When switched to on, if no marker is active yet, marker 1 is acti-
vated. Otherwise, the currently active marker is used as a delta
band power marker (all other marker functions for this marker
are deactivated).
*RST: OFF
Example:
CALC:DELT:BPOW:STAT ON
11.6 Remote Commands in I/Q Analyzer Mode
11.6.1 Using the I/Q Analyzer
CALCulate<n>:FORMat..................................................................................................888
CALCulate<n>:MARKer<m>:SEARch.............................................................................. 888
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RVALue.......................................................889
MMEMory:LOAD:IQ:STATe............................................................................................. 889
TRACe<n>:IQ:BWIDth....................................................................................................889
TRACe<n>:IQ:RLENgth..................................................................................................890
TRACe<n>:IQ:SET.........................................................................................................890
TRACe<n>:IQ:SRATe..................................................................................................... 891
TRACe<n>:IQ:DATA.......................................................................................................892
TRACe<n>:IQ:DATA:FORMat..........................................................................................892
TRACe<n>:IQ:AVERage:COUNt......................................................................................894
TRACe<n>:IQ:AVERage[:STATe].....................................................................................894
Remote Commands in I/Q Analyzer Mode