R&S ESR Series

Remote Control
R&S
®
ESR
990User Manual 1175.7068.02 ─ 12
SYSTem:LXI:INFo?
This query returns the current parameters of the LXI class C.
Only user accounts with administrator rights are able to use LXI functionality.
Return values:
Return values
(example)
<current version> | <LXI class> | <Computername> |
<MAC adress> | <IP adress> | <Auto MDIX>
Usage: Query only
Manual operation: See "Info" on page 513
SYSTem:LXI:LANReset
This command resets the LAN configuration to the values required by the LXI stan-
dard. In addition, the password is reset to its initial state aas well as the LXI instrument
description.
Only user accounts with administrator rights are able to use LXI functionality.
Example:
SYST:LXI:LANR
Usage: Event
Manual operation: See "LAN Reset" on page 514
SYSTem:LXI:MDEScription <String>
This command shows the LXI instrument description. Also, the instrument description
can be changed using this command.
Only user accounts with administrator rights are able to use LXI functionality.
Parameters:
<String>
Example:
SYST:LXI:MDES
Manual operation: See "Description" on page 514
SYSTem:LXI:PASSword <Password>
This command shows or changes the LXI password.
Only user accounts with administrator rights are able to use LXI functionality.
Parameters:
<Password> <password>
Example:
SYST:LXI:PASS
Manual operation: See "Password" on page 513
Network Connection