R&S ESR Series User Manual

Remote Control
R&S
®
ESR
655User Manual 1175.7068.02 ─ 12
For more information, see CALCulate<n>:MARKer<m>:SGRam:SARea on page 654.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example:
CALC:MARK2:SGR:SAR VIS
CALC:MARK2:SGR:XY:MAX
Activates and positions marker 2 on the peak level in the visible
Spectrogram.
Usage: Event
CALCulate<n>:MARKer<m>:SGRam:XY:MINimum[:PEAK]
This command positions the specified marker on the current minimum level of the
spectrogram. The possible position depends on the marker search area.
The command is available for the spectrogram.
For more information, seeCALCulate<n>:MARKer<m>:SGRam:SARea on page 654 .
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example:
CALC:MARK3:SGR:SAR VIS
CALC:MARK3:SGR:XY:MIN
Activates and positions marker 3 on the minimum level in the
visible Spectrogram.
Usage: Event
CALCulate<n>:MARKer<m>:SGRam:Y:MAXimum:ABOVe
This command positions the specified marker on the next peak level of the vertical
axis. The search includes only frames above the current marker position. It does not
change the horizontal position of the marker.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Remote Commands in Receiver Mode

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English