Raymarine LIGHTHOUSE 3 - Standby (Not transmitting); Putting the radar into standby; Powering down your radar scanner

S
tandby(Nottransmitting)
Ifthe‘S tandby’messageisdisplayedthenselect Transmittobegintransmitting.
Transmitting
IfyourR adarscannerisconnected,poweredupandtransmittingthentheRadarimageisdisplayed
andechoes/targetsaredisplayedonscreen.
Puttingtheradarintostandby
Withyourselectedradardisplayedonscreen:
1.Select
Transmitfromthemainmenu.
Theradarscannerwillstoptransmittingandisputintostandbymode.
Poweringdownyourradarscanner
Withyourradarscannerinstandbymode:
1.Selectthe
Officon.
2.Select
Yestoconfirmpowerdown.
Theradarscannerwillstillconsumeasmallamountofpowerwhilstitispoweredoff,thisisto
ensuretheradarcanbepoweredbackupquickly.
262