Raymarine LIGHTHOUSE 3 - Setting up shared brightness

LightHouse™/LightHouse™2MFDInstrumentdisplay/Pilotcontroller
VHFDSCRadioLightHouse™3V3.4orgreater
Multiplebrightnessgroupscanbeconfigured.Fore xample,thesegroupscouldbeusedtoreflect
thephysicallocationofproductsonyourvessele.g.:helmandflybridge.
Sharedbrightnessrequires:
•allproductstobecompatiblewiththesharedbrightnessfunction(seelistofcompatibleproducts
above).
•the
SharedbrightnesssettingsettoOnforallproductsinthebrightnessgroup.
•productstobeassignedtonetworkgroups.
•alltheproductsineachgrouptobesynchronized.
Settingupsharedbrightness
BeforesettingupSharedbrightnessonyourMFD,ensurethatalldisplaysthatyouwanttouse
SharedbrightnessareswitchedonandsettothesameDisplaygroupasyourMFD.
1.Select Thisdisplayfromthe Settingsmenu: Homescreen>Settings>Thisdisplay.
2.SelectDisplaygroup.
Alistofavailabledisplaygroupsisdisplayed.
3.SelecttheDisplaygroupthatyouwanttheMFDtobepartof(Alldisplaysthatyouwanttoshare
brightnesswithmustbesettothesamegroup).
4.Enable
SharedbrightnessusingtheToggleswitch.
5.Select Sync.
‘Sharedbrightnessactive’isdisplayedwhencomplete.
90