Raymarine LIGHTHOUSE 3 - 4.9 Device pairing; Pairing a RMK remote keypad; Pairing with a Quantum Radar scanner; Pairing a Bluetooth speaker

4.9Devicepairing
P
airingaRMKremotekeypad
Y oucancontrolyourMFDwithanRMKkeypad.
Fromthe
Thisdisplaytabofthe Settingsmenu: Homescreen>Settings>Thisdisplay.
1.Select
P
airkeypad.
2.Followtheonscreeninstructionstopairyourkeypad.
Ensureyouselectthecorrectorientationforthekeypadduringthepairingprocess.
3.Repeatsteps1and2oneachMFDyouwanttocontrolfromyourkeypad.
Note:
Pleaserefertothecontrolssectionofyourk eypad’sdocumentationfordetailsoncontrolling
MFDsusingakeypad.
Clearpairing(RMK)
1.Select ClearpairingstounpairALLRMKkeypadscurrentlypairedwiththeMFD.
PairingwithaQuantumRadarscanner
Y oucanconnectaQuantumRadarscannertoyourMFDusingWi-Fi.
Pre-requisites:
•EnsureyouhaveconnectedyourQuantumRadarscannerinaccordancewiththeinstructions
providedwiththeRadarscanner.
•EnsureyouknowyourRadarscanner’sSSIDandpasscode.
1.Select
PairwithQuantumfromthe Thisdisplaytab: Homescreen>Settings>Thisdisplay>
PairwithQuantum.
2.FollowtheonscreeninstructionstopairwithyourQuantumRadar.
Thepairingprocessmaytakeseveralminutestocomplete.
FormoreinformationontheQuantumRadarpairingprocess(includingtroubleshooting
information),refertotheQuantumRadarInstallationinstructionsdocuments.
PairingaBluetoothspeaker
BeforeattemptingtopairwithaBluetoothspeaker,ensurethatthespeakerisswitchedonand
discoverable.
WithyourMFD’sBluetoothenabled:
1.FromtheBluetoothsettingspage,selecttherelevantdevicefromthe
Availabledeviceslist.
2.Ifrequested,confirmthebluetoothpairingcode.
Ifpairingissuccessfulthespeakerwillappearinthe Paireddeviceslistanddisplaythe Connected
message.
Setup
57