Printer Service Mode
D117/D118 3-500 SM Appendix
1001 Bit Switch
009 Bit Switch 9 0 1
bit 5
Display UTF-8 text in the operation panel
0: Enable 1: Disable
Enable (=0):
Text composed of UTF-8 characters can be displayed in the operation
panel.
Disable (=1):
UTF-8 characters cannot be displayed in the operation panel.
For example, job names are sometimes stored in the MIB using UTF-8
encoded characters. When these are displayed on the operation panel,
they will be garbled unless this bit switch is enabled (=0).
bit 6
DFU
- -
bit 7
Enable/Disable Print from USB/SD's
Preview function
0: Enable 1: Disable
Determines whether print from USB/SD will have the Preview function.
Enabled (=0): Print from USB/SD will have the Preview function.
Disabled (=1): Print from USB/SD will not have the Preview function.
1001 Bit Switch
010 Bit Switch 10 0 1
bit 0
to 3
DFU
- -
bit 4
Not Used
- -
bit 5
Auto Job Promotion locks the queue
0: Queue
is not
locked
after AJP
1: Queue
locked after
AJP
If this is 1, then after a job is stored using Auto Job Promotion, new jobs
cannot be added to the queue until the stored job has been completely
printed.
To Next Page
Loading...
Need help?
General
