Printer Service Mode
SM Appendix 3-501 D117/D118
Appendix:
SP Mode
Tables
1001 Bit Switch
bit 6
Allow use of Auto Job Promotion if
connected to an external charge device.
0: Does
not allow
AJP with
ECD
1: Allows
AJP with
ECD
If this is 0, Auto Job Promotion will be automatically disabled if an external
charge device is connected.
Note: We do not officially support enabling this bit switch (1). Use it at
your own risk.
bit 7
Not Used
- -
1003 [Clear Setting]
1003-001 Initialize System
Initializes settings in the System menu of the
user mode.
1003-003 Delete Program DFU
1004 [Print Summary]
1004-001 Service Summary
Prints the service summary sheet (a
summary of all the controller settings).
1005 [Display Version]
1005-002 Printer Version
Displays the version of the controller
firmware.
1101 [ToneCtlSet]
1101-001
Tone (Factory) -
Recalls a set of gamma settings. This can be either a) the factory setting, b)
the previous setting, or c) the current setting.