ng
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
867
CTL
D
SD card error: SD card removed
The SD card is ejected from the slot while the machine is on.
1. Insert the SD card, then turn the machine off and on.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
868
CTL
D
SD card error: SD card access
 -13 to -3: File system error
 Other number: Device error
An error occurs while an SD card is used.
 SD card not inserted correctly
 SD card defective
 Controller board defective
For a file system error:
1. Format the SD card on your PC.
For a device error:
1. Turn off the main power switch and check if the contact with the SD
card slot and SD card is normal.
2. If the contact is normal, insert the SD card into the slot and turn on
the main power switch to check if the error occurs again.
3. If the error occurs again, replace the SD card with an SD card for
another user, and turn on the main power switch.
4. If the error occurs again and again, replace the controller board.
To Next Page
Loading...
Need help?
General
