Vision Operator’s Manual (v12.0 MD) Still-Store • Ops 9–9
Still Properties — Still-Store Properties Menu
•Use the Shaped knob on the Still-Store Properties Menu to assign the still-store
auto key as either shaped or unshaped.
Note — The Play Mode feature is only available for Interlaced video formats. If the native
video format that the switcher is operating in is set to a Progressive video format, this knob is
not available.
•Use the Play Mode knob on the Still-Store Properties Menu to select how the
still-store image will be displayed. You can choose between the following:
› Frame — Select this option to have the entire frame of the image displayed.
› Swap — Select this option to have field 1 and field 2 of the image swapped
when they are displayed.
› Field 1 — Select this option to have only field 1 of the image displayed.
› Field 2 — Select this option to have only field 2 of the image displayed.
•Use the Color Mode knob on the Still-Store Properties Menu to select the color
space, within the YCrCb color model, that the still-store image will be displayed in.
You can choose between the following:
› BT.601 (SD) — Select this option to have the still-store image converted to
the Standard-Definition color space.
› BT.709 (HD) — Select this option to have the still-store image converted to
the High-Definition color space.
Note — If you switch video formats between an HD and SD production, and want to use the
same still-store images for both, you should select the correct color space for each still, each
time you change video formats.
6. Scale the still as follows:
• Toggle Scale Image on the Still-Store Animation Properties Menu to set
whether the image is scaled to the current resolution the switcher is operating in.
Use this option if the image you want to use is of a different resolution than the
switcher is operating in.
7. Adjust the characteristics of a still-store animation as follows:
• Press Animation on the Still-Store Properties Menu.
To Next Page
Loading...
