Vision Operator’s Manual (v12.0 MD) Switcher Basics • Ops 4–31
› Press Red Adjust on the RGB Menu 1-2.
Red Adjustment — RGB Menu 1-2
›Use the Gain knob on the RGB Menu 1-2 to adjust the gain of the red
component. The Red graph updates to reflect your selection.
›Use the Offset knob on the RGB Menu 1-2 to adjust the offset of the red
component. The Red graph updates to reflect your selection. Offset moves the
line towards the top left or bottom right corner.
›Use the Lower Offset knob on the RGB Menu 1-2 to adjust the lower offset
of the red component. The Red graph updates to reflect your selection. The
lower offset moves the minimum point on the graph along either the vertical
axis or horizontal axis.
• Adjust the Gamma of the Red Component as follows:
› Press Red Gamma on the RGB Menu 1-2.
Red Gamma — RGB Menu 1-2
•Use the Gamma Value knob on the RGB Menu 1-2 to adjust the gamma of the
red component.
•Use the Gamma Offset knob on the RGB Menu 1-2 to adjust the offset of the
gamma of the red component. The gamma offset value moves the offset point along
the graph line and the gamma value alters how much perpendicular offset is applied
to the offset point.
This completes the procedure for applying color correction to a video signal using an RGB Color
Corrector.
To Next Page
Loading...
