Spectra T950 - Add Options

Chapter 4 — Configuring the Library Enabling BlueScale Software Support, Options, and Upgrades
November 2016 User Guide—Spectra T950 Library
109
4. ClickSave.TheSystemSetupscreenrefreshesanddisplaysthenew
activationkeyanditsdescriptioninthelistofkeys.Theoptionis
availableforimmediateuse.
Note: KeeparecordofallactivationkeyslistedontheOption
EnablementpaneoftheSystemSetupscreen.Youneedto
re‐enterthemifthelibraryisresettofactorydefaults.
Add Options
ThissectiondescribeshowtodeterminetheHardwareIDandobtain
activationkeysfornewoptionsaftertheinitialinstallation.SeeRenewing
theBlueScaleSoftwareSupportKeyonpage434ifyouneedtorenewor
extendyourservicecontract,whichincludestheBlueScaleSoftware
Supportkey.
Determine the Library Serial Number
Thelibraryserialnumber(HardwareID)isrequiredforrenewingor
extendingyourservicecontract,whichincludestheBlueScaleSoftware
Supportkey,andforpurchasingadditionalCapacityonDemand(CoD)or
otherupgradeoptions.
Usethefollowingstepstodetermineyourlibrary’sserialnumber.
1. AccesstheSystemSetupscreen(seeAccessingtheSystemSetupScreen
onpage104).
2. Makeanoteofthelibrary’sserialnumber(HardwareID),whichis
neededtogeneratetheactivationkeys.
Important
The BlueScale Software Support key and all option activation keys are tied to the
library serial number. If you have multiple libraries, you need separate activation
keys for each library.
Figure 59 Locate the library’s serial number (Hardware ID).
The library’s hardware ID