Spectra T950 - Creating a Storage Partition

Chapter 6 — Configuring and Managing Partitions Creating a Storage Partition
November 2016 User Guide—Spectra T950 Library
190
2. Enterthenumberofchambersyouwanttoassigntothecleaning
partition.
3. ProceedtoConfirmingandSavingthePartitionSettingsonpage211.
CREATING A STORAGE PARTITION
ThefollowingsectionsdescribeusingtheBlueScalepartitionwizardto
createanewstoragepartition.
Note: IfyourlibraryusesE‐QIPstoprovidenetworkconnectivity,refer
tothedocumentationthataccompaniedyourlibrarywhenyou
receiveditforinformationaboutconfiguringE‐QIP‐based
storagepartitions.
Define the Initial Storage Partition Settings
Ifyoudidnotyetcreateanypartitionsonthelibrary,youcanchooseto
eitherhavetheBlueScalepartitionwizardautomaticallycreateasingle
storagepartitionthatusesallofthelicensedchambersandinstalleddrives
oryoucanusethewizardtomanuallycreatestoragepartitionstoyour
ownspecifications.
Automatically Create a Partition Usethefollowingstepstohavethe
BlueScalepartitionwizardautomaticallycreateasinglestoragepartition
thatusesallthechambersthatarelicensedbytheCoDkeyandallinstalled
drives.Thepartitionhasasinglechamberassignedtotheentry/exitpool.
1. Loginasauserwithsuperuseroradministratorprivileges.
2. Fromthetoolbarmenu,selectConfiguration > Partitionstodisplaythe
SharedLibraryServicesscreen.
Important
The drives you plan to use in the partition must be installed in the library before
you start configuring the partition.