Spectra T950 - CONFIGURING OPTIONAL LIBRARY SETTINGS; Install a Security Certificate and Authentication Key

Chapter 4 — Configuring the Library Configuring Optional Library Settings
November 2016 User Guide—Spectra T950 Library
123
CONFIGURING OPTIONAL LIBRARY SETTINGS
Thissectiondescribesoptionalconfigurationsettingsthatyoumayselect
touseforyourlibraryandoperatingenvironment.
Install a Security Certificate and Authentication Key
IfyouenabledSSL(seeEnableSSLonpage113),usethefollowingstepsto
obtainandinstallasecuritycertificateandauthenticationkey.
1. ObtainaSecurityCertificateandAuthenticationKey.
Note: Theauthenticationkeymustnotbeencrypted.
Manual Time and
Date Settings
(Default)
Ifnotalreadydisplayed,theDateandTimescreenrefreshestoshowoptions
formanuallysettingthedateandtime.
1. UsetheDateandTime+and–buttonstoselectthemonth,day(date),year,
hour,andminutevalues.
Note: ThevaluesintheDate&Timecountersdonotwrap.Forexample,to
changethemonthfromDecembertoJanuary,
clickandholdthe–buttonto
decrementthemonth.
2. ClickSave.ClickPrevioustoreturntotheSystemSetupscreen.
If you select... Then...
Figure 65 Configure the settings for manually
setting the date and time.
If you want to... Then...
Createyourown
securitycertificate
1. Requestasecuritycertificateandtheauthenticationkeyfromyoursigning
authorityorgenerateoneyourself.
2. Savethesecuritycertificatefile(ssl.crt)andtheauthenticationkey(ssl.key )
intherootfolderofaUSBdevice.
3. ConnecttheUSBdevicetoaporton theLCM(seeFigure15andFigure 16on
page43)ortheT950Bfrontpanelandwaitforthedevicetomount.