EasyManua.ls Logo

Spectra T950 - Assign Global Spare Drives

Spectra T950
586 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 — Configuring and Managing Partitions Creating a Storage Partition
November 2016 User GuideSpectra T950 Library
195
Dothefollowingtoselecttheroboticcontrolpath:
1. FromtheNameandMediaTypescreen,clickNext.TheRoboticControl
Pathscreendisplaysalistofthecontrollerscurrentlyinstalledinthe
library.
2. Selectthecontroller(s)thatprovidesthecontrolpathfortherobotics.
Assign Global Spare Drives
TheGlobalSpareoptionletsyouremotelysubstituteaworkingdrivefora
failedoneusingasparedriveinthelibrary.HavingaGlobalSparedrivein
thelibraryletsyoucontinueyourbackupoperationsandreplacethefailed
drivethenexttimeyouarephysicallypresentatthelibrary.SeeUsinga
GlobalSpareDriveonpage396forinstructionsonhowtousetheGlobal
Sparedriveinplaceofafaileddrive.
Requirements BeforeyoucanconfiguretheGlobalSpareoption,the
followingrequirementsmustbemet:
Figure 122 Select the exporting controller.
Important
If you want to use the controller failover feature for RIMs or F-QIPs (see Configure
Controller Failover on page 128), keep the following requirements in mind:
You must have two controllers (RIMs or F-QIPs) installed in the library.
If the partition uses SCSI drives, you cannot use the F-QIP that provides
connectivity for the SCSI drives in the failover pair. A minimum of three
controllers are required for this type of configuration.
If you configured controller failover before you configured the storage partition,
select the primary controller in the failover pair to provide the robotic control path.
Important
Do not select more than one drive to provide the robotic control path unless you
know the storage management software can support this.
Important
If you select two different generations of drives to provide the robotic control path,
then you are not able to assign a Global Spare to the partition because all of the
drives in a partition with a Global Spare must match the technology generation of
the Global Spare.

Table of Contents

Other manuals for Spectra T950

Related product manuals