Spectra T950 - Pause the PostScan Process

Chapter 9 — Configuring and Using Media Lifecycle Management Using PostScan
November 2016 User Guide—Spectra T950 Library
307
7. RepeatStep4thoughStep6toaddadditionaltapestotheTape List.
Note: IfyouwanttoremoveoneormorecartridgesfromtheTape List:
 SelectthecartridgeandclickDeletetoremoveitfromthelist.
 ClickDelete Alltoremoveallofthecartridgesfromthelist.
8. ClickSubmittoaddthecartridgesintheTape ListtothePostScan
queue.
Pause the PostScan Process
IfyouneedtoperformanyoftheoperationslistedinBackground
Operationsonpage284orifyouneedtoresetthelibrary,youcanpause
thePostScanprocess.Thelibraryreturnsanycartridgescurrentlybeing
scannedtotheiroriginallocations.
UsethefollowingstepsifyouneedtotemporarilypausethePostScan
process.
1. Fromthetoolbarmenu,selectMaintenance > MLM.TheMedia
LifecycleManagementToolsscreendisplays.
Note: ThePause PostScanbuttonisonlypresentifthePostScan
processisrunning.
2. ClickPause PostScantopausethePostScanoperationforonehourso
thatyoucanusetheGlobalSpareorperformotherlibraryoperations.
Afteranhourpasses,thelibraryrestartsthePostScanoperationonthe
tapethatwasbeingverifiedatthetimeoftheinterruption,provided
thePostScanprerequisiteslistedon
page300aremet.
Important
Pausing PostScan affects all partitions that are configured to use PostScan.
Figure 184 Click Pause PostScan on the MLM Tools screen
to interrupt the PostScan process.