Spectra T950 - Confirming and Saving the Partition Settings

Chapter 6 — Configuring and Managing Partitions Confirming and Saving the Partition Settings
November 2016 User Guide—Spectra T950 Library
211
CONFIRMING AND SAVING THE PARTITION SETTINGS
Afteryoufinishconfiguringapartition,confirmandsavethepartition
settingstocompletethecreationprocess.
Note: IfyouwanttosavetheconfigurationtoaUSBdevice,connect
thedevicetoaUSBportontheLCM(seeConnectaUSBDevice
totheLibraryonpage179)oroperatorpanel(T950Bonly)and
allowtimeforthedevicetomountbeforecontinuing.
1. Afteryoucompletetheconfigurationscreensforthepartitionas
describedintheprevioussections,clickNext.TheSaveLibrary
Configurationscreendisplays.
2. Selectwhetheryouwanttosavethecurrentlibraryconfiguration.
 Don’t Save Library Configuration—Abackupofthechangedlibrary
configurationisnotsaved.
 Save Library Configuration To(highlyrecommended)—Savesa
backupofthelibraryconfigurationtotheselecteddestination.
Usingthisoptionishighlyrecommendedtoensurethatyoucan
easilyrestorethelibraryconfiguration,ifnecessary.
SelectwhethertosavethelibraryconfigurationfiletoaUSBdevice
ortoemailittoanalready‐configuredmailrecipient(see
Configure
MailUsersonpage118).
Note: Donotusethedefaultautosupport@spectralogic.comemail
recipient.SpectraLogicdoesnotsaveemailedconfigurationfiles
unlesstheyarespecificallyrequestedfortroubleshooting.
Figure 134 The Save Library Configuration screen.