Spectra T950 - USING MLM REPORTING; Generate MLM Reports

Chapter 9 — Configuring and Using Media Lifecycle Management Using MLM Reporting
November 2016 User Guide—Spectra T950 Library
308
USING MLM REPORTING
AftertheLTOcartridgesinyourlibraryareaddedtotheMLMdatabase,
youarereadytomakeuseofthispowerfultooltomanage,track,and
reportallfacetsoftapeusagefromcreationtoretirement.
Generate MLM Reports
1. Logintothelibrary.
2. Fromthetoolbarmenu,selectGeneral > Media Lifecycle Management.
TheMediaLifecycleManagementReportscreendisplays.
Note: YoucanalsoclickontheFilledCapacitybargraphonthe
GeneralStatusscreen(Figure172onpage286).
3. SelecteitherTotal Librar yoraspecificpartitionfromthePartitiondrop‐
downlist,andthenclickGo.
Note: Bydefault,theMediaLifecycleManagementReportscreen
showsaMediaHealthreportforallSpectraCertifiedMLM‐
enabledcartridgesintheentirelibrary.
Figure 185 Select the partition for which you want to display
the media health report.