Spectra T950 - Install the Update Package

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
November 2016 User Guide—Spectra T950 Library
443
Install the Update Package
Select the BlueScale Package and Update Options
1. Logintothelibraryasauserwithsuperuseroradministratorprivileges.
2. IfyoudownloadedtheBlueScalepackagetoaUSBdeviceorifyou
plantoupdatetheRCMcontrolmodulesorRIM2controllersusinga
USBdevice,connecttheUSBdevicetotheUSBportontheLCMand
waitforthedevicetomountbeforecontinuing(see
UsingaUSBDevice
onpage178).
3. Ifyoureceiveanerrormessagestatingthatyourdiskisfullwhenthe
libraryattemptstounzipaBlueScalepackage,youneedtodelete
downlevelpackagesbeforeyoucancontinue.SeeManageUpdate
Packagesonpage454.
4. SelectMaintenance > Package Update.ThePackageUpdatescreen
displays.
Note: IfthelibrarynotifiesyouthatyourBlueScaleSoftwareSupport
keyexpired,seeRenewingtheBlueScaleSoftwareSupportKey
onpage434.
5. ClickBegin Library Update.IftheLicenseAgreementscreendisplays,
readthelicenseagreement,thenclickAccept.
Note: Ifyoudeclinetheagreement,youarenotabletoupdatethe
library.
Figure 280 Click Begin Library Update to start the process.