Spectra T950 - Page 444

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
November 2016 User Guide—Spectra T950 Library
444
6. TheSelectLibraryPackagescreendisplays,listingthefilenamesforthe
availableBlueScalepackages.
Note: ThefilenamesbeginwiththeBlueScaleversionnumber,
followedbythedateofreleaseinYYYYMMDDformat.
7. SelecttheappropriateBlueScalepackage.
Note: BlueScalepackagesmaybefoundonthesourcesdescribedin
thetablebelow.
Figure 281 Select the BlueScale package.
Source Description
Spectra Logic SelectanddownloadthedesiredBlueScalepackagefrom Sp ectraLogic’s
packageservertothememorycardintheLCMandtheninstallit.
Notes:
 ThelibrarymusthaveaconnectiontotheInternetbeforeyoucanusethis
option(see
ConfigureNetworkSettingsonpage116).
 IfdirectedtodosobySpectraLogicTechnicalSupport,updatetheIPaddress
andpackagedirectoryfortheSpectraLogicpackageserver(see
Configurea
PackageServeronpage139).
Memory Card SelectthedesiredBlueScalepackagefrompackagesalreadystoredonthe
memorycardintheLCM.
USB Device SelectthedesiredBlueScalepackagefrompackagesstoredonaUSBdevice.
ThereisabriefdelaywhilethelibraryaccessestheUSBdevicewhenyouselect
thisoption.
Notes:
 TheUSB Device optionisonlyavailableifyouconnectedaUSBdevice
containingtheBlueScalepackagein
Step2onpage443.
 TheBlueScalepackagemustbestoredintherootdirectoryoftheUSBdevice.