Spectra T950 - Page 445

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
November 2016 User Guide—Spectra T950 Library
445
8. ClickNext.TheLibraryPackageUpdateOptionsscreendisplays.
TheLibraryPackageUpdateOptionsscreenonlylistsoptionsthatare
applicablebasedonyourlibraryconfiguration.
Note: ClickingUpdateimmediatelystartstheupdateprocess.Spectra
LogicrecommendsthatyouselectusingaUSBdevicetoupdate
RIM2controllers(seeStep11onpage448)and,ifthelibrary
doesnothaveEtherLib,usingaUSBdeviceupdateRCMcontrol
modules(seeStep9onpage446)beforeclickingUpdate.
Configured
Package Server
(server name varies)
SelectthedesiredBlueScalepackagestoredonapreviouslyconfiguredpackage
server,ifyouhaveoneavailable.
Note: Thisoptionisonlyavailableifyoupreviouslyconfiguredapackage
server.See
ConfigureaPackageServeronpage139forinformationabout
configuringapackageserver.
Figure 282 The Library Package Update Options screen.
Source Description