Spectra T950 - Use the BlueScale Vision Camera

Chapter 5 — Operating the Library Monitoring Your Library
November 2016 User Guide—Spectra T950 Library
174
Use the BlueScale Vision Camera
TheBlueScaleVisioncameraandweb‐basedBlueScaleVisionviewerlet
youseetheinteriorofthelibrarytoobserveimportandexportoperations,
tapemounts,cartridgemoves,androboticoperationsinrealtime.
UsethefollowingstepstolaunchtheBlueScaleVisionviewer.
1. ConnectanEthernetcablefromtheBlueScaleVisioncameraconnector
onthebackoftheframetoanEthernetnetwork.
2. ConnecttotheBlueScaleVisionviewer.
 Using the Camera Icon
a. Usingaremoteconnection,logintothelibrary’sBlueScaleweb
interfaceusingawebbrowser.
Note: Thesoftwareincludedwiththeblackcamerarequires
ActiveXtoviewthestreamingvideoandcontrols.You
mustuseInternetExplorerorsee
Streamingvideoand
cameracontrolsdonotworkforthelibrarycameraon
page358foralternatesolutions.
Figure 105 Location of the camera Ethernet port.
BlueScale Vision
camera connector
Media Expansion Frame
BlueScale Vision
camera connector
Main Frame or Drive Expansion Frame