Spectra T950 - Check Component Firmware Versions (Optional)

To Next Page

To Previous Page

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware

November 2016 User Guide—Spectra T950 Library

438

Check Component Firmware Versions (Optional)

Note: ThisprocedureisnotnecessaryunlessrecommendedbySpectra

LogicTechnicalSupport.

1. Logintothelibraryasauserwithsuperuseroradministrator

privileges.

2. Fromthetoolbarmenu,selectMaintenance > Tools.TheMaintenance

Toolsscreendisplays.

3. Ifyouwanttosavetheinformationaboutthefirmwareversionstoa

USBdevice,connectaUSBdevicetoaUSBportontheLCMorthe

operatorpanel(T950Bonly)andwaitforthedevicetomountbefore

continuing.

Note: TheoptiontosavetheinformationtoaUSBdeviceisonly

displayedifyouconnectaUSBdevicebeforeyouselect Utilities

(seeUsingaUSBDeviceonpage178).

4. SelectUtilities.TheUtilitiesscreendisplays.

5. SelectDisplay Firmware Versions.TheUtilitiesscreenrefreshestoshow

adescriptionoftheDisplayFirmwareVersionstool.

Figure 275 The Maintenance Tools screen.

Figure 276 Select the Display Firmware Versions utility.

Other manuals for Spectra T950