Spectra T950 - Configure a Package Server

Chapter 4 — Configuring the Library Configuring Optional Library Settings
November 2016 User Guide—Spectra T950 Library
139
Configure a Package Server
Overview Configuringapackageserverisoptional.Alocalpackage
servercanbeusedtostoreBlueScalepackagesdownloadedfromSpectra
LogicforupdatingtheBlueScalesoftwareorlibrarycomponentfirmware.
UpdatepackagescanalsobedownloadeddirectlyfromtheSpectraLogic
websitetothememorycardinthelibrary’sLCMor
toaUSBdevice.
Note: ForadditionalinformationaboutBlueScalepackagesandhowto
usethem,seeUpdatingtheBlueScaleSoftwareandLibrary
Firmwareonpage436.
User Privilege Requirements Onlyauserwithsuperuseroradministrator
privilegescanconfigureapackageserverintheBlueScaleinterface.
Configure a Package Server Usethefollowingstepstoconfigure,modify,
ordeletealocalpackageserver.
1. IdentifytheserverorserversyouwanttouseforstoringBlueScale
packages.MakesurethattheseserverscanaccesstheInternetandthat
theyareonthesamenetworkasthelibrariesyouwanttoupdate.
Note: BothMicrosoft’sInternetInformationServices(IIS)andthe
Unix‐basedApacheserverworkaspackageservers.
2. Logintothe libraryasauserwithsuperuse roradministratorprivileges.
3. SelectMaintenance > Package Update.ThePackageUpdatescreen
displays.
Figure 74 The Package Update screen.