Spectra T950 - Configure Alarms

Chapter 11 — Configuring and Using AutoSupport Configuring AutoSupport
November 2016 User Guide—Spectra T950 Library
338
Delete an AutoSupport Profile
Usethefollowingstepstodeleteanexistingprofile.
1. Logintothelibraryasauserwithsuperuseroradministrator
privileges.
2. Fromthetoolbarmenu,selectMaintenance > AutoSupport.The
AutoSupportscreendisplays(see
Figure204onpage334).
3. ClickManage Profiles.TheAutoSupportProfilesscreendisplays(see
Figure210onpage337).
4. ClickRemovenexttothecontactyouwanttodelete.TheRemove
Profilesscreendisplays,askingyoutoconfirmthedeletion.
5. ClickRemove.TheAutoSupportprofilesscreenredisplayswiththe
updatedlistofprofiles.
6. ClickPrevioustoreturntothemainAutoSupportscreen.
Configure Alarms
Usethestepsinthissectionifyouwantthelibrarytoautomatically
generateanASLfileintheeventthatanyofthecriticaleventslistedunder
CriticalAlarmsonpage331occurs.
1. Ifyoudidnotalreadydoso,configureoneAutoSupportprofileasthe
AutoSendrecipient(seeStep4onpage336).
2. ClickConfigure Alarms fromtheAutoSupportscreen.TheAutoSupport
CriticalAlarmConfigurationscreendisplays.
Figure 211 The AutoSupport Critical Alarm Configuration
screen.