Spectra T950 - Page 336

Chapter 11 — Configuring and Using AutoSupport Configuring AutoSupport
November 2016 User Guide—Spectra T950 Library
336
4. ClickNext.TheSystemandMailInformationscreendisplays.
 Enterinformationaboutyourlibrary’soperatingenvironmentand
storagemanagementsoftwareinthefieldsprovided.
 SelectAutoSend Profiletousethecurrentprofileastherecipientfor
criticalalarmlogsetsautomaticallysentbythelibrary.
Note: OnlyoneprofilecanbeconfiguredastheAutoSendprofile.
 Selectthemailrecipient(s)fromtheMail Tochoicespresented.Only
mailrecipientsthatwerepreviouslyconfiguredare listed(see
ConfigureMailUsersonpage118).
Note: Youmustselectautosupport@spectralogic.comasoneofthe
recipientsifyouwantthelibrarytosendanAutoSupportticket
requesttoSpectraLogicTechnicalSupport.
Figure 208 Enter information about your operating
environment.