Spectra T950 - Log Off or Switch Users

Chapter 3 — Introducing the BlueScale User Interface Using the BlueScale User Interface
November 2016 User Guide—Spectra T950 Library
97
5. ClickLogin.Thelibrary’sGeneralStatusscreendisplays.
Note: Ifyoujustpowered‐onorresetthelibrary,theremaybeadelay 
afteryouclickLoginwhilethelibrarycompletesitsinitialization.
Whentheinitializationis complete,theGeneralStatusscreen
displays.
6. Ifyouwanttoenableencryptionorconfigureencryptionsettingsor
keys,selectSecurity > EncryptiontologintotheEncryptionfeature
(seetheSpectraTapeLibrariesEncryptionUserGuidefordetailed
instructions).
Log Off or Switch Users
1. IfascreenotherthantheLoginscreenisdisplayed,selecttheSecurity
toolbartodisplaytheSecurityoptions.
2. SelectSwitch Usertologoutthecurrentlyloggedinuserandredisplay
theLoginscreen.
3. Ifdesired,loginagainusingthesameoradifferentusernameand
password.
Figure 53 The BlueScale user interface General Status screen.
Figure 54 The Security toolbar.
Security toolbar
Switch User