Spectra T950 - Configure the Chambers for the Partition

Chapter 6 — Configuring and Managing Partitions Creating a Cleaning Partition
November 2016 User Guide—Spectra T950 Library
189
3. EnteranameforthepartitionandselectLTO Clean or TS11x0 Clean as
themediatype.
Configure the Chambers for the Partition
1. FromtheNameandMediaTypescreen,clickNext.TheChambersand
Drivesscreendisplays.
Figure 117 Enter a name for the partition and select LTO
Clean or TS11x0 Clean to create a cleaning partition.
For this field... Do the following...
Name Enteraunique,descriptivenametoidentifythepartitionasacleaning
partition.Namescanbeanylengthandcaninclude@‐_/.andthespace
character.Partitionnamesover32characterscausesascrollbartodisplayon
somescreensandarenotrecommended.
Note: Thedefaultnameforacleaningpartitionis“Cleaningn”,wherenisa
number.ThepartitionnamesarelistedalphabeticallyonmanyoftheBlueScale
screens.Ifyouwantthecleaningpartitionstobelistedafterthestorage
partitions,precedethenamewitha“z”or“_”.
Media Type Select LTO CleanorTS11x0 Clean tocreateacleaningpartition.
Figure 118 Specify the number of chambers for the cleaning
partition.