Spectra T950 - Modify an Existing User; Delete an Existing User; ACCESSING THE SYSTEM SETUP SCREEN

Chapter 4 — Configuring the Library Accessing the System Setup Screen
November 2016 User Guide—Spectra T950 Library
104
Modify an Existing User
Usethefollowingstepstochangesettingsforanexistinguser.
1. Logintothelibraryasauserwithsuperuserprivileges.
2. Fromthetoolbarmenu,selectSecurity > Edit Users.TheLibraryUsers
screendisplays(seeFigure55onpage103),showingalistoflibrary
usernames.
3. Findtheuser’sname,thenclickEditnexttothename.
4. Changetheuser’sname,password,group,oranycombinationofthese
asrequired.
5. ClickSavetosaveyourchanges.
Delete an Existing User
Usethefollowingstepstodeleteanexistinguser.
Note: Thelibraryrequirestheretobeaminimumofoneuserassigned
tothesuperusergroup.Youcannotdeletethelastmemberofthe
superusergroup.
1. Logintothelibraryasauserwithsuperuserprivileges.
2. Fromthetoolbarmenu,selectSecurity > Edit Users.TheLibraryUsers
screendisplays(see
Figure55onpage103),showingalistoflibrary
usernames.
3. Locatethenameoftheusertodelete,thenclickDeletenexttothat
user’sname.
Whenthescreenrefreshes,theuserlistnolongerincludestheuser
nameyoujustdeleted.
ACCESSING THE SYSTEM SETUP SCREEN
Overview Allofthesettingsforthelibrary’sgeneralconfigurationoptions
areaccessedthroughtheSystemSetupscreen.Thescreenisdividedinto
twopanes.Youmayneedtousethescrollbartoseetheentirescreen.
Important
If you change the passwords for the default users, make sure that you keep a record
of the new passwords. The passwords cannot be reset if you forget them.
Important
If you delete the default users, make sure that you keep a record of at least one
superuser name and password.