Spectra T950 - Page 103

Chapter 4 — Configuring the Library Configuring Library Users
November 2016 User Guide—Spectra T950 Library
103
2. Fromthetoolbarmenu,selectSecurity > EditUsers.TheLibraryUsers
screendisplays.
3. CompletetheinformationintheAdd/UpdateUserpanel.
Note: Usernamesandpassw ordscancontainanycombinationofthe
numbers0‐9,low eranduppercasealphabeticcharacters(a‐zand
A‐Z),andtheatsymbol(@),dash(‐),underscore(_),period(.),
forw ardslash(/),andspacecharacters.Thereisnolimittothe
lengthbutthatwerecommendlengthsoflessthan2048characters.
4. ClickSave.Thenewusernameandgroupassignmentisaddedtothe
listofusers.
5. RepeatStep3andStep4foreachadditionallibraryuser.
Figure 55 The Library Users screen.
For this field... Enter...
User Thenamefortheuser.
Password
Retype Password
Apasswordfortheuserandthenretypethepasswordtoconfirm.
Notes:
 Forsecurity,thetextinthePasswordandRetype Password fieldsisshownas
asterisks
(*).
 Thoughhighlyrecommended,passwordsarenotrequiredforanyofthe
threeusertypes.
User Type Selectthegrouptowhichtheuserbelongs.
Note: SeeUnderstandingUserGroupsandSecurityonpage101for
descriptionsoftheusergroupsandprivilegesassociatedwitheach.