Spectra T950 - Configure Controller Failover

Chapter 4 — Configuring the Library Configuring Optional Library Settings
November 2016 User Guide—Spectra T950 Library
128
4. EnterthefollowinginformationontheSNMPSettingsscreen.
5. ClickPrevioustoreturntotheSystemConfigurationscreen.
Configure Controller Failover
Overview ThelibrarysupportsusingtwoRIMsorF‐QIPstoprovidea
redundantconnectiontotherobotics.Asinglecontrollercanbeconfigured
asthefailovercontrollerformultiplepartitions.See
ControllerFailoveron
page77forinformationabouthowcontrollerfailoverfunctions.
Field Description
System Contact Mapstothevalueforsystem.4(sysContact)objectintheMIB.Enterthe
informationsandclickSave.
System Location Mapstothevalueforsystem.6(sysLocation)objectintheMIB.Enterthe
informationsandclickSave.
Valid Query
Communities
ListsallSNMPcommunitiestowhichthelibrarycurrentlybelongs.Thelibrary
onlyrespondstoSNMPqueriesfrommembersofthesecommunities.The
defaultvalidquerycommunityispublic.
 ClickEditnexttothesettingyouneedtomodify.Thecurrentsettingsdisplay
inthecorrespondingAdd/Updatesectionofthescreen.ClickSaveinthe
correspondingAdd/Updatesectionofthescreenafteryoumakeyour
changes.
Important: Community strings are case sensitive. If the library is configured to
include the community called “OurCommunity,” it answers to queries from
OurCommunity but not from a community called “ourcommunity.”
 ClickDeletetoremoveasetting.
Trap Destinations Listsallthecurrentlyconfiguredtrapdestinations(IPaddresses)towhichthe
librarysendsSNMPtraps.Therearenodefaulttrapdestinationsconfigured.
 ClickEditnexttothesettingyouneedtomodify.Thecurrentsettingsdisplay
inthecorrespondingAdd/Updatesectionofthescreen.ClickSaveinthe
correspondingAdd/Updatesectionofthescreenafteryoumakeyour
changes.
 ClickDeletetoremoveasetting.