Spectra T950 - Page 337

Chapter 11 — Configuring and Using AutoSupport Configuring AutoSupport
November 2016 User Guide—Spectra T950 Library
337
5. ClickNext.TheSaveProfilescreendisplays.Verifythatallofthe
informationshowniscorrect.
Ifanyinformationneedstobechanged,clickPrevioustodisplaythe
screeninwhichthechangesneedtobemade.
6. Whenalloftheinformationiscorrect,clickSave.
7. TheAutoSupportProfilesscreenredisplays,listingthenewly
completedprofile.
8. RepeatStep1onpage335throughStep6ifyouwanttocreate
additionalprofiles.
Note: Whenyoucreatemultipleprofiles,theyarelistedintheorderin
whichtheyarecreated,notinalphanumericorder.
9. ClickPrevioustoreturntothemainAutoSupportscreen.
IfoneoftheprofilesisconfiguredasanAutoSendrecipient,the
Configure Alarmsbuttonisactive(seeFigure204onpage334).
Figure 209 Review the profile information.
Figure 210 All of the AutoSupport profiles are listed on
the AutoSupport Profiles screen.