Spectra T950 - Page 138

Chapter 4 — Configuring the Library Configuring Optional Library Settings
November 2016 User Guide—Spectra T950 Library
138
Usethefollowingstepstodetermineifthebarcodelabelsonyour
cartridgesincludeachecksumcharacter.
1. Logintothelibraryasauserwithsuperuseroradministrator
privileges.
2. Fromthetoolbarmenu,select Maintenance > Tools.TheMaintenance
Toolsscreendisplays.
3. SelectUtilities.TheUtilitiesscreendisplays.
4. ClickShow Advanced.TheAdvancedUtilitiesConfirmationscreen
displays.
5. ClickNext.TheUtilitiesscreenrefreshestoshowalistoftheadv anced
utilities.
6. SelecttheModify Barcode Reporting utility.Thescreenrefreshestoshow
thedetailsfortheutility.
7. Makesurethattheoptionsfortheutilityaresetasfollows:
8. Examineeachbarcodelabelyouwanttotestandmakeanoteofthe
human‐readabletextoneach.
9. Importthecartridgesintoastoragepartition,thenviewthepartition
inventory,eitherontheBlueScaleInventoryscreen(see
Viewthe
CartridgeInventoryforaLocationonpage258)orthroughyour
storagemanagementsoftware.
 Ifthereportedbarcodeexactlymatchesthehuman‐readabletext
yourecorded,thenthebarcodeincludesachecksumcharacter.
 Ifthereportedbarcodeismissingtheright‐mostcharacter,thenthe
barcodedoesnotincludeachecksumcharacter.
10. SeeChangingtheLibrary’sDefaultBarcodeReportingConfiguration
onpage135toconfigurethebarcodereportingtomatchyourbarcodes.
Important
After the utility completes, the LCM reboots. After the library completes its
initialization, it rescans the barcode labels of all media in the library. This rescan
takes up to 45 minutes per frame to complete.
For this field... Make sure it is set to...
Select checksummed behavior Ignorecheck‐sumbarcodes
Select Right or Left Reportright‐handcharacters
Select the number of characters to
report: (1 - 16)
16