Spectra T950 - Page 448

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
November 2016 User Guide—Spectra T950 Library
448
11. OntheLibraryPackageUpdateOptionsscreen,selectwhetherand
whereyouwanttobackupthelibraryconfigurationbeforeperforming
theupdate.
Note: Thebackupofthelibraryconfigurationdoesnotincludethe
MLMorDLMdatabases.
12. OntheLibraryPackageUpdateOptionsscreen,selectwhetherornot
anemailissenttoSpectraLogicTechnicalSupporttoupdatethe
library’ssupportrecords.
Notes:  SendinganotificationtoSpectraLogicTechnicalSupportis
highlyrecommended.
 Thisnotificationdoesnotincludetheconfigurationbackupfile.
 Thisoptionisonlyavailableifyoupreviouslyconfiguredthe
autosupport@spectralogic.commailuser’sSMTPIPaddress(see
CreateorModifyaProfileonpage335).
Figure 286 Select whether and where you want to backup
the library configuration.
Choice Action
Save to USB device SavesabackupofthelibraryconfigurationtoaUSBdevice.Usingthisoptionis
highlyrecommendedtoensurethatyoucaneasilyrestorethelibraryif
necessary.
Note: TheSave to USB deviceoptionisonlyavailableifyouconnecteda USB
devicein
Step2onpage443.
Email to... Emailsabackupofthelibraryconfigurationfiletoanalready‐configuredmail
recipient.
Note: TheEmail to optionisonlyavailableifyoupreviouslyconfiguredmail
recipients(see
ConfigureMailUsersonpage118).
Do not save Updatesthelibrarywithoutsavingabacku pofthelibraryconfiguration.
Thisisnotrecommendedunlessyoubackedupthelibraryconfigurationright 
beforestartingthepackageupdateprocedure.
Figure 287 Select whether or not you want to send an
update to Technical Support.