Spectra T950 - Page 447

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
November 2016 User Guide—Spectra T950 Library
447
Update RCM Controllers Using USB Device Ifyourlibraryhasdrive
expansionframesanddoesnotuseEtherLib,youcanchoosetoupdate
theRCMcontrollersusingaUSBdevice.Thisoptioncanbeusedto
updateeitherSpectraLSorSpectraPCcontrolmodules.Thisshortens
thetimerequiredtocompletetheupdate.
Note: IfyourlibraryisconfiguredtouseEtherLib,donotselectthe
Update RCM controllers using USBdeviceoption.Performingthe
updateusingEtherLibisfasterthanusingtheUSBdevice
option.
SelectUpdate RCM controllers using USB deviceontheLibraryPackage
UpdateOptionsscreen.
Note: IfyourlibraryhasanEtherLibnetwork,andyouselectUpdate
RCM controllers using USB device,thelibraryusestheUSBdevice
methodtoupdatetheRCMs.
10. IfthelibraryincludesRIM2controllers,determinewhetherornotto
updatethemusingaUSB device.Thisshortensthetimerequiredto
completetheupdate,butrequiresmanualintervention.
Note: YoucanonlyupdateRIM2controllers,notRIMcontrollers,
usingtheUSBoption.
SelectUpdate RIM2 controllers using USBdeviceontheLibraryPackage
UpdateOptionsscreen.
Figure 284 Select Update RCM controllers using USB
device.
Figure 285 Select Update RIM2 controllers using USB
device.