Spectra T950 - Page 113

Chapter 4 — Configuring the Library Configuring the Global System Settings
November 2016 User Guide—Spectra T950 Library
113
Enable SSL EnableordisableSecureSocketLayer(SSL)accesstothe
BlueScalewebinterface.
Important: Enabling SSL configures the BlueScale web
interface to use a secure Internet connection. You must
prefix the IP address with https:// instead of just entering
the IP address when accessing the BlueScale web
interface.
1. SelecttheEnable SSLcheckboxtoenabletheoption(or
clearthecheckboxtodisableit).
2. ClickSave.
3. ClickOKinresponsetothenotificationaboutresetting
thewebserver.
4. Waitforthewebservertoreset(approximately2to
3
minutes),andthenlogbackintothelibrary.
5. Ifdesired,InstallaSecurityCertificateand
AuthenticationKeyasdescribedonpagepage123.
Cleared
(Disabled)
Enable SNMP
Agent

SNMP Settings
EnableordisabletheSNMPagentandconfigureSNMP
settings.
1. SelecttheEnable SNMP checkboxtoenabletheoption(or
clearthecheckboxtodisableit).
2. ClickSave.
3. IfyouenabledSNMP,clickSNMP Settingstoconfigure
theSNMPoptions.See
EnableandConfigureSNMPon
page126fordetailedinformationandinstructions.
4. ClickSavetosavetheSNMPsettingsandreturntothe
SystemSetupscreen.
Notes:
 TheoptiontoedittheSNMP Settingsisonlypresentafter
youselectEnable SNMP AgentandclickSave.
 SpectraLogiclibrariesimplementSNMPVersion2.
Cleared
(Disabled)
Enable Soft Power EnableordisabletheSoftPowerfeature.SeeUsetheSoft
PowerFeatureonpage160forinformationabouttheSoft
Powerfeatureandinstructionsforusingit.
1. SelecttheEnable Soft Power checkboxtoenablethe
option(orclearthecheckboxtodisableit).
2. ClickSave.
Note: TheSoftPowerfeaturecanonlybeenabledor
disabledbyasuperuser.
Cleared
(Disabled)
Setting Description Default