Spectra T950 - Page 114

Chapter 4 — Configuring the Library Configuring the Global System Settings
November 2016 User Guide—Spectra T950 Library
114
Syslog Server IP
Address
EntertheIPaddressofanexternalSyslogserverusedto
collectthesystemmessagespostedbythelibrary.SeeUse
Syslogonpage165forinformationaboutwhattheSyslog
messagescontain.
1. EnteravalidIPaddressfortheSyslogserver(orsetthe
IPaddressto0.0.0.0todisabletheoption).
2. ClickSave.Thelibraryimmediatelybeginsforwardingall
systemmessagestotheserveratthespecifiedIPaddress.
0.0.0.0
(Disabled)
BlueScale Vision IP
Address
(uptothree
BlueScaleVisionIP
addressfields
displaydepending
onthesizeofthe
library)
EnabletheBlueScaleVisioncameraiconforthecameraat
thespecifiedIPaddress.IfyouhavenotyetsettheIP
addressforthecamera,seeSettingtheCameraIPAddress
onpage150.
ForeachIPaddressyouenter ,uptothree,a
cameraicondisplaysonthestatusbar(seeFigure48on
page91).SeeUsetheBlueScaleVisionCameraonpage174
tolearnaboutusingthecamera.
1. EnteravalidIPaddressforthecameraforwhichyou
wanttodisplaytheicon.
2. ClickSave.
3. Ifdesired,repeatthesestepstoenableuptotwo
additionalcameraicons.
Notes:
 Itisnotnecessarytoenablethecameraicontoconnectto
theBlueScaleVisionviewerforacamera.Afterconnecting
anEthernetcabletotheBlueScaleVisioncameraconnector
ontheback ofthelibrary(see
Figure82onpage150),
entertheca mera ’sIPaddressinyourwebbrowser.
 IfyournetworkusesDHCPorifyoudonotknowthe
currentfixedIPaddressforthecamera,see
Discovering
andSettingtheBlueScaleVisionCameraIPAddresson
page372forinformationabouthowtodeterminewhat
thecurrentIPaddressisandmakeanydesiredchanges.
 ToremoveacameraiconfromtheStatusbar,settheIP
addressto0.0.0.0.
 ReadtheBlueScaleVisionCameraUserGuidefordetailed
informationaboutconfiguringandusingthewhite
cameraand
VivotekFD8361FixedDomeNetworkCamera
User’sManualforinformationaboutconfiguringand
usingtheblackcamera.
 TheorderoftheBlueScaleVisionIPAddressfieldsinthe
SystemSetupscreendoesnotnecessarilyhaveany
relationshiptothepositionofthecamerasinthelibrary.
Note: Thesoftwareincludedwiththeblackcamera
requiresActiveX
®
toviewthestreamingvideoand
controls.YoumustuseInternetExplorerorsee
Streaming
videoandcameracontrolsdonotworkforthelibrary
cameraonpage358foralternatesolutions.
0.0.0.0
(Disabled)
Setting Description Default