Spectra T950 - Page 115

Chapter 4 — Configuring the Library Configuring the Global System Settings
November 2016 User Guide—Spectra T950 Library
115
Network Settings SettheIPaddressingfortheLCMEthernetport.Youcan
alsoconfigureuptotwoDNSIPaddressesforusewiththe
NTPservice.SeeConfigureNetworkSettingsonpage116
fordetailedinformationandinstructions.
Note: Dependingonhowyouareaccessingthelibrary,the
statusbarshows:
 Thelibrary’scurrentIPaddresswhenyouaccessthe
libraryusingthetouchscreenoradirectconnectionto
theLCM.
 Thelibrary’sname,ifset,whenyouareaccessingthe
libraryusingtheBlueScalewebinterfacethroughaweb
browserconnection.
DHCP
Mail User Configurerecipientsforemailscontainingsystem
messages,traces,anddiagnosticresultsgeneratedbythe
library.SeeConfigureMailUsersonpage118fordetailed
informationandinstructions.
autosupport@ 
spectralogic.com
Auto Configuration
Save
EnableordisablesendingtheAutoConfigurationSavefile
toapreviouslyconfiguredmailrecipient.SeeEnableEmail
fortheAutoConfigurationSaveFileonpage120for
detailedinformationaboutthisoptionandinstructionsfor
configuringit.
Note: TheAutoConfigurationSavefileisalways
generated,regardlessofthesettingforthisoption.See
Use
AutomaticBackupoftheLibraryConfigurationon
page146forinformationabouttheAutoConfiguration
Savefile.
Cleared
(Disabled)
Routine
Maintenance
Enableordisabletheroutinemaintenanceoptionforthe
LCMoperatingsystem.SeeConfigureRoutine
Maintenanceonpage125fordetailedinformationabout
thisoptionandinstructionsforconfiguringit.
Cleared
(Disabled)
Date And Time SeeSettheDateandTimeonpage122fordetailed
informationandinstructionsforsettingthedateandtime.
Currentdateand
timeforthe
Mountaintime
zone(USand
Canada)
Setting Description Default