Spectra T950 - Page 171

Chapter 5 — Operating the Library Monitoring Your Library
November 2016 User Guide—Spectra T950 Library
171
Usethefollowingstepstoviewinformationabouttheindividualdrivesin
thelibrary.
1. Logintothelibraryasauserwithadministratororsuperuser
privileges.
2. SelectConfiguration > DLM(orDrivesifDLMisnotenabled)todisplay
theDrivesscreen.Thisscreenlistsallofthedrivesinthelibrary,along
withbasicinformationabouteachdriveandtheavailableoperations
foreachdrive.
Note: Theoperationsavailableforeachdrivedependonhowyouare
accessingtheBlueScaleuserinterfaceandwhetherornot:
 DLMisenabled
 Thedriveisconfiguredinapartition
 AutoDriveCleanisenabledforthepartition
3. ClickDetailnexttothedriveforwhichyouwanttoviewdetailed
information.TheDriveDetailsscreendisplays.
Figure 102 The Drives screen.
Figure 103 The Drive Details screen.