Spectra T950 - Page 193

Chapter 6 — Configuring and Managing Partitions Creating a Storage Partition
November 2016 User Guide—Spectra T950 Library
193
3. Enteranameforthestoragepartitionandselectthemediatype.
Note: Ifthestoragepartitionmediatypeisgrayedout,thenalllicensed
chambersareassignedtopartitions.Editacurrentpartitionto
freeupchambersorpurchaseaCapacityonDemandkey.
Figure 121 Enter a name for the partition and select the
media type.
For this field... Do the following...
Name Enteraunique,descriptivenametoidentifythepartition.Namescanbeany
lengthandcaninclude@‐_/.andthespacecharacter.Partitionnamesover32
characterscausesascrollbartodisplayonsomescreensandarenot
recommended.
Thedefaultnameforastoragepartitionis“Partition
n”,wherenisanumber.
Note: InmanyoftheBlueScalescreens,thepartitionsarelistedalphabetically.
Keepthisinmindwhennamingyourpartitions.
Media Type Select LTO tocreateastoragepartitionthatusesLTOdrivesandmedia.Select
TS11x0
tocreateastoragepartitionthatuses TS11x0technologydrivesand
media.
Note: Ifyourlibrarycontainsadifferentdrivetechnology,selectthemedia
typethatcorrespondstothatdrivetechnology.