Spectra T950 - Page 251

Chapter 7 — Importing and Exporting Cartridges Using the Advanced Import/Export Options
November 2016 User Guide—Spectra T950 Library
251
Select the TAP
Select the direction
6. UsetheChamberdrop‐downlisttoselectthesourcechamberforthe
move,thenclickGotorefreshthescreen.
 FormovestotheTAPfromeithertheentry/exitorstoragepool,the
selectedchamberisthesourceforthemove.TheTeraPack Case
Contentslistshowsthebarcodesofthecartridgesinthemagazinein
theselectedchamber.
 FormovesfromtheTAPtoeithertheentry/exitorstoragepool,the
selectedchamberisthedestinationforthemov e.UsetheChamber
drop‐downlisttoselectanemptychamberintheselectedpool.
Select this TAP... If you want to use...
Center ThedualTAPlocatedinthecenterofthemainframe.
Left ThebulkTAPlocatedinthebulkTAPmediaframeontheleftendofthe
library.
Important: When using the Left TAP, all moves in the queue must be either
imports or exports. Building a move queue that contains moves both to and
from the carousel is not supported.
Note: FormovestotheLeftTAP(thebulkTAP),themagazineismovedtoan
availableemptychamberinthecarousel.
For a... Select... To move the magazine from...
Storage partition TAP > Storage TheselectedTAPtotheselectedchamberinthestoragepool.
Storage > TAP TheselectedchamberinthestoragepooltotheselectedTAP .
TAP > EE TheselectedTAPtotheselectedchamberintheentry/exitpool.
EE > TAP Theselectedchamberintheentry/exitpool totheselectedTAP.
Cleaning partition TAP > Storage FromtheselectedTAPtotheselectedchamberinthe
cleaningpartition.
Storage > TAP Fromtheselectedchamberinthecleaningpartitiontothe
selectedTAP .
TAP > EE
EE > TAP
Foracleaningpartition,theoptionsformovingtoorfrom
theentry/exitpoolarenotvalid.