Spectra T950 - Page 293

Chapter 9 — Configuring and Using Media Lifecycle Management Enabling MLM and Configuring Global
November 2016 User Guide—Spectra T950 Library
293
3. InthePostScanBlackoutPeriodspane,usetheStartandStopdrop‐
downliststosetthestartandendtimesfortheblackoutperiodforeach
dayoftheweek.
Notes:  Timesarebasedona24‐hourclock,where0ismidnight.
 Todisabletheblackoutperiodforaspecificday,setboth
StartandStopto0.
 Bydefault,theblackoutperiodsareallsetto0(disabled).The
PostScanprocessrunswhenevertherearetapesinthe
PostScanqueueandaGlobalSparedriveisavailable.
4. ClickSave.
5. TheblackoutperiodsyousettakeeffectwhenyouenablePostScanfor
individualpartitionsbyconfiguringoneormorePostScantriggers(see
EnableandConfigureMLMPreScanandPostScanonpage199).
Figure 176 Select the desired blackout periods for PostScan.