Spectra T950 - Page 327

Chapter 10 — Using Drive Lifecycle Management Monitoring Drive Health Using DLM
November 2016 User Guide—Spectra T950 Library
327
4. ClickDLMontheDriveDetailsscreentoviewadetailedDriveLifecycle
Managementreport.
Note: TheDLMbuttonontheDriveDetailsisnotpresentifMLMand
DLMarenotenabled(seeEnableandConfigureMLMPreScan
andPostScanonpage199).
TheDriveLifecycleManagementReportscreenisdividedintofour
panes,whicharedescribedinthefollowingtable.
This pane... Shows...
Drive health
overview
Thedriveidentifierandanystatusinformation.Thedrivehealthiconindicates
thedrive’soverallhealthatthetimethescreenwasdisplayed.
Summary of tapes Thebarcodelabelinformationandhealthinformationforthelast10cartridges
loadedintothedrive.Thehealthiconindicatesthecartridgehealthatthetime
thecartridgewasunloadedfromthedrive(TapeHealthatUnmount)andthe
currenthealthstatusstoredintheMLMdatabase(CurrentTapeHealth).Refer

tothetableonpage310ofChapter9–ConfiguringandUsingMediaLifecycle
Management,beginningonpage276fordescriptionsoftheiconsrelatedto
mediahealth.
Note: Dependingonthedrive’shistory,thispanemaynothaveanyentries.
Figure 199 Check the drive health icon for the overall
health of the drive.
Figure 200 The Summary of tapes pane shows the
barcode label information and health information for the
last 10 cartridges loaded into the drive.