Spectra T950 - Configure Log Set Forwarding

Chapter 11 — Configuring and Using AutoSupport Configuring AutoSupport
November 2016 User Guide—Spectra T950 Library
340
Usethefollowingstepstomodifylogsetforwarding.
1. ClickLog Forwarding fromthemainAutoSupportscreen.TheConfigure
LogForwardingscreendisplays.
2. Selecttheforwardingoptionsyouwanttouse.
 Allow BlueScale to automatically send log setsisselectedbydefault.
Clearthecheckboxifyoudonotwantthelibrarytoautomatically
generateandsubmitmonthlyAutoSupportLogsetstooneormore
preconfiguredrecipients.
 Theautosupport@spectralogic.commailrecipientisautomatically
selected.AllASLfilesgeneratedbythelibraryareautomatically
senttoSpectraLogicTechnicalSupport.
 Selectanyadditionalmailrecipient(s)fromtheMail Tochoices
presented.Onlymailrecipientsthatwerepreviouslyconfiguredare
listed(seeConfigureMailUsersonpage118).
3. ClickSave.
Afteryourchangesaresaved,theConfigureLogForwardingscreen
redisplayswithaconfirmationmessage.
4. ClickPrevioustoreturntothemainAutoSupportscreen.
Figure 212 The Configure Log Forwarding screen.