Spectra T950 - Page 371

Chapter 12 — Library Troubleshooting Resetting Components
November 2016 User Guide—Spectra T950 Library
371
5. ClickShow Advanced.TheAdvancedUtilitiesConfirmationscreen
displays.
6. ClickNext.TheUtilitiesscreenrefreshestoshowalistoftheadv anced
utilities.
7. ScrollthroughthelistofadvancedutilitiesandselectReset Controller.
Thescreenrefreshestoshowthedetailsfortheutility.
8. Usethedrop‐downlisttoselectthecomponentidentifierforthe
controllerthatyouneedtoreset.
9. ClickRun Utilitytoresettheselectedcontroller.
Whentheresetiscomplete,theUtilityResultsscreendisplays,showing
thatthecontrollerwasreset.
Note: Whenthecontrollerisreset,thelibrarypostssystemmessages
thattheF‐QIPdisappearedandreappeared.
10. Thecontrollerisreadyforuse.
Figure 232 The Reset Controller utility for resetting a RIM.