Spectra T950 - Page 391

Chapter 12 — Library Troubleshooting Restoring the Library Configuration
November 2016 User Guide—Spectra T950 Library
391
6. Scrollthroughthelistofadvancedutilitiesandselectoneofthe
following,asapplicableforyoursituation.Thescreenrefreshestoshow
thedetailsfortheselectedrestoreutility.
Note: TheAdvancedUtilitiesscreenliststheutilitiesinalphabetical
order.Thefollowingtableliststheutilitiesinmost‐frequently‐
usedorder.
7. ClickRun Utility.
Afterabriefdelay,theUtilityResultsscreenappears,showingthatthe
configurationfilewasuploadedand/ortheconfigurationrestored.The
librarythenperformsapower‐cyclereset.
Use this Restore
Option...
To...
Restore Library
Configuration from
Auto Save
Restoreusinganautomaticallygeneratedconfigurationbackupfilethatis
storedonaUSBdeviceorLCMmemorycard(seeRestoreFromanAuto
ConfigurationSaveFileonpage385).
Note: Theautomaticallygeneratedconfigurationbackupfilecontainsthe
libraryconfiguration,aswellastheMLMandDLMdatabases.
Restore Library
Configuration from
USB
RestorealibraryconfigurationfilepreviouslystoredonaUSBdevice.
Note: Beforestartingthisprocedure,inserttheUSBdeviceintoaUSBporton
theLCMortheoperatorpanel(T950Bonly)andallowtimeforthedeviceto
mount.
Upload Backup
Configuration
Uploadaconfigurationbackupfiletoatemporarylocationinthelibraryfroma
computerthathasnetworkaccesstothelibrary.
Note: Upload Backup Configurationisonlyavailablewhenyouaccessthe
librarythroughtheBlueScalewebinterface.
1. ClickUpload Backup Configurationatthetopofthescreen.
2. Whentheuploadiscomplete,youmustthenruntheRestore Library
Configuration from Uploaded Fileutilitytorestorethelibraryconfiguration.
Restore Library
Configuration from
Uploaded File
CompletetherestoreprocessafterusingUpload Backup Configurationtoupload
asavedconfigurationfilefromacomputer.
Note: ThisoptionisusedinconjunctionwithUpload Backup Configuration,
whichmustberunfirst.
Important
Before the library is restored using a saved configuration file on the USB device, the
current configuration is saved to the USB device with a time stamp indicating when
the file was created. The library is then restored using the selected auto saved
configuration.
The USB device now contains one additional configuration file.