Spectra T950 - Page 398

Chapter 13 — Drive Troubleshooting Using a Global Spare Drive
November 2016 User Guide—Spectra T950 Library
398
4. ClickGlobal Spareforthepartitionthatcontainsthefaileddriveto
displaytheGlobalSpareUsagescreen.
Note: TheGlobal Sparebuttonisnotpresentifoneormoredrivesare
notconfiguredasGlobalSparesforthepartition(seeAssign
GlobalSpareDrivesonpage195).
5. ClickUse Sparenexttothedriveforwhichyouwanttosubstitutean
availableGlobalSparedrive.Waitforthelibrarytocompletethe
sparingoperation.
Notes:  Whenyouselectthedrivetoreplace,theBlueScalesoftware
disablestheselecteddriveandconfiguresanavailableGlobal
SparedrivetoreportthesameWWNandserialnumberas
thedriveitisreplacing.Thefaileddrivecanthenberemoved
andreplacedthenexttimeyouarephysicallyatthelibrary.
 IfyouhavemorethanoneavailableGlobalSparedriv e, the
libraryautomaticallyselectsadriveinnoparticularorder.
Figure 256 Click Use Spare for the drive you want to replace.