Spectra T950 - Page 453

Chapter 14 — Maintaining the Library Updating the BlueScale Software and Library Firmware
November 2016 User Guide—Spectra T950 Library
453
Library configuration is corrupted during the update process Usethe
followingstepstorestorethelibrary’sconfigurationifitbecomes
corruptedduringthepackageupdateprocess.
Note: ThelibraryautomaticallysavesaCheckpointConfiguration
Backupfilepriortobeginningapackageupdate.
1. Fromthetoolbarmenu,selectMaintenance > Tools.TheMaintenance
Toolsscreendisplays.
2. SelectUtilities.TheUtilitiesscreendisplays.
3. ClickShow Advanced.TheAdvancedUtilitiesConfirmationscreen
displays.
4. ClickNext.TheUtilitiesscreenrefreshestoshowalistoftheadv anced
utilities.
5. ScrollthroughthelistofadvancedutilitiesandselectRestore
Configuration from Checkpoint.Thescreenrefreshestoshowthedetails
fortheutility.
6. ClickRun Utility torestorethelibrarytotheCheckpointlibrary
configuration.
7. Afterthelibraryconfigurationrestores,performthePackageUpdate
processagain.
Caution
The Restore Configuration from Checkpoint utility should only be used
immediately after a package update is performed.
Any library configuration or inventory changes made between the time that the
package update is performed and the utility is run are lost.
Figure 290 The Advanced Utilities screen.