Spectra T950 - Page 470

Chapter 15 — Maintaining the Drives Updating Drive Firmware
November 2016 User Guide—Spectra T950 Library
470
2. SelectConfiguration > DLM(orDrives) toviewalistofallthedrives
currentlyinstalledinthelibrary.
3. Foreachdrive,makeanoteofthefollowinginformation:
 Drivetypeandgeneration—LTO‐2orlatergenerationdrive(listed
asIBMUltrium‐TDn,wherenisthegeneration)orTS11x0
technology(listedasIBM3592E07Fibre)
 Interface—ShowninboththeDriveTypefieldandintheDrive
Identifierfield
4. Foreachdrive,clickDetailtoviewinformationaboutthecurrentstatus
oftheselecteddrive,includingitsfirmwareversion.
5. Makeanoteofthefirmwareversionthedriveiscurrentlyusing.
Figure 300 Determine the drive type, generation, and interface.
Figure 301 Locate the drive firmware version on the Drive
Details screen.
The drive
identifier
The drive type, generation,
and interface
The drive firmware version